Skip to content

Pump air control

An innovative piece of machinery

About Pump air control

A must-have to maximise your fluid management system

Working simultaneously as a core component of the Matrix Total Fluid Management System, the Pump Air Control is an innovative piece of machinery that is a must have to maximise your fluid management system.

  • Increase security
  • Increase safety

For safety and increased security, the PAC is a must have to maximise your fluid management system, with one PAC required for each air pump. Designed to supply air to the pump only when Matrix authorises the dispense.

When the highest level of security is needed, locks down access to the fluid tank by keeping pumps inoperable until a “call to dispense” signal has been sent. Since pump air supply is shut off, you can remove the worry about spills and expensive clean up if a broken line should occur.

Technical Specifications

Operating Pressure Range 23-145 PSI (1.7 – 10 bar)
Maximum Air Flow 93 SCFM (2.6m3/min.)
Power Supply 120-240 VAC line voltage, 24VDC solenoid
Output Power 10mW – 100mW
Frequency 50/60 Hz
RF Communication 2.4 GHz
Obstructed RF Communication Range 250-300 ft (76.2 – 91.0 m)
Operating Temperature Range 32°F to 122°F (0°C to 50°C)
RF Operating Temperature Range -40°F to 185°F (-40°C to 85°C)
Storage Temperature Range -40°F to 185°F (-40°C to 85°C)
Enclosure Type 3
Weight 3.4 lbs (1.5 kg)

Enquire about this product

Enquire about this product


Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!

We deliver Australia-wide

Levanta’s national network of warehouses enables us to supply our workshop equipment direct to you, wherever your business is located right throughout Australia. Whether you need a service pit for a remote Pilbara mine or a 4 post hoist for a Sydney dealership workshop, we have delivery options to suit you.


All Levanta products are backed up by an industry-leading warranty. We’ve invested our reputation into our quality brands, and we stand behind our products. Our dedicated team of design engineers work hard to detect and correct any issue – no matter how small – before it gets to our customers.

Submit A Warranty Claim

Please use the form below to lodge a warranty claim for your equipment.