Pump air control
An innovative piece of machinery
|Operating Pressure Range||23-145 PSI (1.7 – 10 bar)|
|Maximum Air Flow||93 SCFM (2.6m3/min.)|
|Power Supply||120-240 VAC line voltage, 24VDC solenoid|
|Output Power||10mW – 100mW|
|RF Communication||2.4 GHz|
|Obstructed RF Communication Range||250-300 ft (76.2 – 91.0 m)|
|Operating Temperature Range||32°F to 122°F (0°C to 50°C)|
|RF Operating Temperature Range||-40°F to 185°F (-40°C to 85°C)|
|Storage Temperature Range||-40°F to 185°F (-40°C to 85°C)|
|Weight||3.4 lbs (1.5 kg)|
A must-have to maximise your fluid management system
Working simultaneously as a core component of the Matrix Total Fluid Management System, the Pump Air Control is an innovative piece of machinery that is a must have to maximise your fluid management system.
- Increase security
- Increase safety
For safety and increased security, the PAC is a must have to maximise your fluid management system, with one PAC required for each air pump. Designed to supply air to the pump only when Matrix authorises the dispense.
When the highest level of security is needed, locks down access to the fluid tank by keeping pumps inoperable until a “call to dispense” signal has been sent. Since pump air supply is shut off, you can remove the worry about spills and expensive clean up if a broken line should occur.