XPR-7 Series 2 post maintenance lifts

Ideal for lifting mowers and other turf equipment

One of the most versatile utility 2 post maintenance hoists in existence, backed up by 40 years of lift know-how and support. This 2 post mower maintenance lift has everything you need: leading edge technology, top-of-the-line materials, quality design, and 3.1t turf equipment lifting capacity. It’s ideally suited for workshops with ceilings higher than 12 feet, keeping your floor clear while you work beneath mowers and other turf maintenance vehicles.

Safe and reliable 2 post mower lift

This durable and reliable 2 post hoist offers you a wide selection of systems to lift virtually any type of turf maintenance equipment. Powerful and secure, you’ll find this lift greatly increases the speed of maintenance and repair work on all popular sized of turf maintenance equipment, ranging from large fairway mowers to green mowers, utility carts, sand groomers, fertiliser sprayers, golf buggies and refreshment carts.

XPR-7’s fully adjustable wheel pan and fork assembly fit a wide array of wheel arrangements, and provide open access to the gearbox, blades, reels and other components for increased workshop efficiency.

Featuring the most advanced engineered technology available in the industry, these turf lifts are built to safety standards well above normal requirements. They include a wealth of standard and optional features to support your need for performance and security.

Every XPR-7 Series 2 post hoist comes with:

  • 3,175 kg lifting capacity
  • Wide drive-thru configuration
  • Single-piece columns
  • Single-point safety release
  • Dual hydraulic direct-drive cylinders
  • Electric / hydraulic power system

XPR-7 Series Models



(Columns have Extra Height)

BendPak hoists meet the Australian (AS 1418.9) and International Standards.

Turf Lift Arm Design

Lowered Arm Tube Supports
To minimise the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.

Automatic Arm Restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Maintenance Lift Column Construction

Single Piece Column (Left)
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Optional Column Extension (Right)
Gives you the flexibility of increasing the overhead clearance to maximise the vehicles you can service.


Safety with Smart Technology

Single Point Safety Release (Left)
The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.

On the level
Our dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Auto Shut-off Top Bar (Above)
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.

Durable Powder-Coat Finish

High Speed Hydraulics

All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.

Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Direct-Drive Technology

BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.

Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurised hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.

XPR Series 2 Post Hoist Warranty

Don’t Leave Your Servicing and Certification to Chance

For more than a decade, America’s best lift has been coupled with the best warranty in the business. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer.

Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!


Turf Lift Description XPR-7TR XPR-7TR XH
Lifting capacity 7,000 lbs. / 3,175 kg 7,000 lbs. / 3,175 kg
Max wheel pan load 3,500 lbs. / 1,588 kg 3,500 lbs. / 1,588 kg
Max load per fork 1,750 lbs. / 794 kg 1,750 lbs. / 794 kg
Overall height 145″ / 3,683 mm 169″ / 4,292 mm
Width (outside of columns) 137″ / 3,480 mm 137″ / 3,480 mm
Overall width (Outside of baseplate) 145″ / 3,683 mm 145″ / 3,683 mm
Floor to overhead switch 141″ / 3,581 mm 141″ / 3,581 mm
Inside columns 115″ / 2,921 mm 115″ / 2,921 mm
Max rise 69″ / 1,753 mm 69″ / 1,753 mm
Drive – thru clearence 106″ / 2,692 mm 106″ / 2,692 mm
Lifting time 45 Seconds 45 Seconds
Motor 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps
Shipping weight 2,166 lbs. / 985 kg 2,166 lbs. / 985 kg
Shipping dimensions 148″ x 27″ x 28″ / 3,759 mm x 686 mm x 711 mm 148″ x 27″ x 28″ / 3,759 mm x 686 mm x 711 mm