fbpx Skip to content

OMER KAR250 twin truck knuckle lift

Heavy duty with 25T lifting capacity

About OMER KAR250 twin truck knuckle lift

Double your power with a twin platform truck lift system

Perfectly suited for heavy duty lifting, the twin system truck lift gives you double the runway so you can get the job done! With a lift capacity of 25t this massive heavy duty truck lift is perfectly suited for trucks, buses and any other large capacity vehicle, and is available in surface or flush mount. The KAR250 Twin System is an electro-hydraulic pantograph lift with vertical raising, free of interference on the floor and ideal for heavy vehicle maintenance and lifting.

  • 25t lifting capacity per platform
  • Dual synchronised lifting platforms
  • Flush or surface mount versions available
  • Electro-hydraulic pantograph vertical raising
  • Interference free floor space

Technical Specifications

Lifting Capacity 25T per lift
Lifting Height 1,760 mm
Runway Length (options) 9,000 / 10,000 / 11,000 / 14,500 mm
Collapsed Height 360 mm
Air Operated Safety locks
Gross Weight 7,000 kg per lift
Lifting Time 70 seconds
Motor 415v / 3/50Hz / 7.5kW

Galvanised option available on request
Pit cover plates available as an optional extra

Product Features

Lifting strength

OMER paid particular emphasis to the lift’s overall strength, with solutions specially developed for this model. These include tubular structure runways and smooth metal sheet to bear loads under the worst conditions (such as asymmetric loads).

Vertical leg design

Thanks to the original and innovative leg design, the knuckle lift has vertical movement. Another advantage of this solution is the discharge of the vertical forces on the foundation. The knuckle lift also features an electronic balancing system with automatic levelling.

Piston innovation

Housing of the piston in the upper part of the leg protects it against both dirt falling from vehicles, and damage from tools accidentally dropped by the technician.

No electronics

The master slave synchronism with “torsion bar” brought inside the control box offers easy maintenance and minimal downtime. Since no electronics are involved, the system remains mechanical/hydraulic.

Torque & deformation resistant platforms

No mechanical stress on the structure increases the lifespan of the unit. The box structure has more resistance to flections & torque, even with higher loads.

Open space working environment

Your technicians will experience more comfort and improved access to the vehicle maintenance workspace.

More stability – no sliding points

4 fixed points with no sliding points creates more stability and less resistance to torque or deformations. There are also no cantilever points on the platforms.

Safety features of the KAR250 knuckle lift system

Control console features dead man’s buttons and is designed to be simple and intuitive.
Mechanical safety locks secure the lift while it’s working. Piston air is used for the opening of mechanical safety locks.
Burst valve inserted at the back of each lifting piston with hydraulic hose for high pressures, and 5 different pressure relief valves.

The KAR 250 truck lift at-a-glance:
  • Lift Capacity of 25t per platform
  • Double runways with synchronisation lifting
  • Embossed anti-slip finish on all platform surfaces
  • Electronic balance system with automatic levelling
  • Runway designed to accommodate rolling jacking beams
  • No mechanical connection between the platforms
  • Mechanical locks on each lifting cylinder
  • Burst valve on each lifting slave cylinder
  • Qty 5 max. over-pressure valves
  • Photo sensors for runways levelling control
  • Acoustic warning and by-pass key when lift reaches 500 mm from collapsed position
  • Low voltage commands
  • Dead man control

Enquire about this product

Enquire about this product

Servicing icon by Levanta


Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!

Delivery icon by Levanta

We deliver Australia-wide

Levanta’s national network of warehouses enables us to supply our workshop equipment direct to you, wherever your business is located right throughout Australia. Whether you need a service pit for a remote Pilbara mine or a 4 post hoist for a Sydney dealership workshop, we have delivery options to suit you.

Check graphic


All Levanta products are backed up by an industry-leading warranty. We’ve invested our reputation into our quality brands, and we stand behind our products. Our dedicated team of design engineers work hard to detect and correct any issue – no matter how small – before it gets to our customers.

Submit A Warranty Claim

Please use the form below to lodge a warranty claim for your equipment.