Skip to content

M928 Royal Tyre changer

Universal super-automatic machine for rims up to 28″

About M928 Royal Tyre changer

The M928 Royal tyre changer is suitable for all car wheels.

It enables the user to mount and demount any type of tyre currently available on the international markets, from standard to sport tyres, from low profile tyres to special UHP and 11” runflat tyres such as: Goodyear Run On Flat, Pirelli P ZERO, Bridgestone RFT, Michelin ZP, Continental SSR, Dunlop DSST.

The axial mounting turntable allows quick, secure wheel clamping and bead breaking on both sides with no need to turn the wheel over (the wheel is clamped on the machine just once).

The IP (Increased Power) system means the speed rotation of the turntable is automatically adjustable, and the torque remains at the best ratio also at maximum speed (6-15 rpm).

Its comprehensive multipurpose console with all operating controls offers easier “dynamic” bead breaking, independent or simultaneous, of both the tyre beads by means of its telescopic system with double disk.

Technology and user friendliness

  • Dynamic bead breaking device with double specular bead breaker disk. The radial disk positioning is made easier by an automatic system that prevents any manual positioning by the operator.
  • New (patent pending) controlled penetration system gives effective bead breaking on even the most difficult wheels.
  • Easier tyre mounting thanks to the simultaneous use of upper bead breaker (using as an extra bead presser) and the tools head.

Leverless technology means no effort is required
The demounting procedure uses the same working movements, but absolutely no effort is required from the operator thanks to the patented 11” leverless technology incorporated in the tool’s head.

The mounting procedure is exactly the same, and just as quick and convenient. Mounting and demounting operations benefit from the simple traditional procedure complemented by innovative solutions such as the double bead breaker and spindle wheel clamping.

Technical Specifications

Rim diameter 12″-28″
Max self-centring torque 1200 Nm
Self-centring rotation speed 6-15 rpm
Max. wheel diameter 1080 mm
Max. wheel width 15″
Working pressure 10 BAR
Bead breaker stroke 540 mm
Noise level when running ≤70 dB (A)
Motor (11IP” System) (1IP” System) 0.75 kW – 50/60 Hz
Supply voltage 1 Ph – 200/230 V
Max. weight wheel 85 kg
Machine weight 400 kg

Product Features

Ergonomic layout and single control device

Ergonomic wheel lift (supplied as standard) allows easy positioning of all wheels on the turntable. The pedal unit allows the operator to always work in the same position when operating the wheel lift. The machine working height is designed for perfect ergonomics with all kind of wheels, which makes this tyre changer ideal for all operators.

A “tailor-made” tyre changer to meet all needs

Optional accessories

  • Air-operated bead pressing device
  • Complete tubeless tyre inflating set
  • Automatic rim locking handle
  • The 11PH 28″ bead pressing accessory enables the user to mount and demount the upper bead on the most difficult wheels. Available on request.
  • 11KFS 28″ is an advanced inflating device. With its variable diameter setting and innovative “top-down-shot” it grants a perfect and easy inflation of all type of tyres. Available on request.
  • 11AUTOLOCK II” Electric rim handle locking features approximately 200 cycles of locking/unlocking for each battery. Weight unvaried in comparison to the standard handle included with the machine. Complete interchangeability with the cones included with the machine. Can be used with all standard rims.

Supplied with:

  • 1 Locking handle
  • 2 Batteries
  • 1 Battery charger
  • 1 Extension for protecting rims

Other accessories

  • Reverse wheel flange
  • Pick-up rim kit
  • Universal flange for close centre rims
  • Other accessories are available upon request.

Enquire about this product

Enquire about this product

Servicing

Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!

We deliver Australia-wide

Levanta’s national network of warehouses enables us to supply our workshop equipment direct to you, wherever your business is located right throughout Australia. Whether you need a service pit for a remote Pilbara mine or a 4 post hoist for a Sydney dealership workshop, we have delivery options to suit you.

Warranty

All Levanta products are backed up by an industry-leading warranty. We’ve invested our reputation into our quality brands, and we stand behind our products. Our dedicated team of design engineers work hard to detect and correct any issue – no matter how small – before it gets to our customers.