M624 2V FS tyre changing machine
Mount and demount any type of tyre
About M624 2V FS tyre changing machine
Automatic tyre changer with tilting post
Suited for all car wheels, this tyre changer enables the operator to mount and demount any type of tyre currently available on the international markets, from standard and sport, through to low profile tyres.
- Suitable for all car tyres
- Lever-less technology
- Air-operated tilting column
Automatic tyre changer with tilting post, suitable for all car, SUV, van and motorcycle wheels. Available in one-speed motor version and in 2V version with two-speed motor and tubeless inflating device FS.
The tool-holder shaft is balanced and activated by means of an air-operated servo control with automatic head locking in the ideal working position. A roller under the horizontal operating arm minimises the effort of operators.
The turntable is equipped with a patented system to switch the working range from 10” – 20” to 14” – 24” (from outside rim clamping) with a simple manual shift.
M624 tyre changers equipped with ALLY 80 bead lifting/pressing device, are tested and approved by WDK Frankfurt to mounting and dismounting the UHP and Run Flat Tyres system.
|Self Centering Chuck Opening||10″ – 24″ Ext.|
|Self Centering Chuck Opening||13″ – 26″ Int.|
|Bead Breaking Power (blade) 10 BAR||15.500 Nm|
|Bead Breaking Blade Opening||430 mm|
|Max. Wheel Diameter||1060 mm|
|Max. Wheel Width||3 – 14″|
|Working Pressure||10 BAR|
|Noise Level When Running/td>||> 70 dB (A)|
|Two Speed Motor||0,75 kW-1 Ph-200/230 V-50/60 Hz|
|Max Self Centering Torque||1.200 Nm|
|Weight Machine||265 kg|
“IP system” (Increased Power system)
The speed rotation of the turntable automatically adjustable, the torque remains at the best ratio also at maximum speed. It’s available only for M624 2V FS (2-speed version: 6 – 15 rpm).
The turntable can clamp new generation alloy rims from both outside and inside without any damage, thanks to its special plastic protections supplied as standard.
The bead-breaking arm can be set in two positions: standard and racing. In the racing position the blade opening is 430 mm! The blade is articulated for better penetration between tyre bead and rim. A special plastic guard (supplied as standard) protects alloy rims during the bead-breaking.
The tubeless inflating device pedal is located at the side of the unit to prevent accidental activation.
The high capacity tank (16 litres) located inside the unit complies with Norm EN 286 I.1 in conformity with EEC (European Economic Community) guidelines 87/404/EEC.
- Tyre lever
- Set of 4 jaw pads
- Plastic cover for blade
- Plastic cover for tyre lever
- 2 pc. Plastic inserts for tool head
Recommended accessories / also available:
Ally 30 help arm
Ally 70 Help arm and bead pressing device
- 2 Speed
- Tubeless Inflation
Enquire about this product
Enquire about this product
Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!
We deliver Australia-wide
Levanta’s national network of warehouses enables us to supply our workshop equipment direct to you, wherever your business is located right throughout Australia. Whether you need a service pit for a remote Pilbara mine or a 4 post hoist for a Sydney dealership workshop, we have delivery options to suit you.
All Levanta products are backed up by an industry-leading warranty. We’ve invested our reputation into our quality brands, and we stand behind our products. Our dedicated team of design engineers work hard to detect and correct any issue – no matter how small – before it gets to our customers.