Featuring a huge 8.1t lift capacity, heavier column construction, carriage construction and frame components, this heavy duty hoist is ready for your busy commercial workshop. With clear floor ease of use, the lift offers superior direct drive performance, backed by cutting edge technology and high quality materials. Ideally suited to shops with a ceiling height of 12 feet minimum, this lift won’t crowd your floor while you work beneath it.
- 8,165 kg lifting capacity
- CE Approved and Certified. Meets Australian Standards AS 1418.9
- Massive A36 steel base plates
- Oversized 53″ tall carriage for superior strength and durability
- Large cable sheave diameter reduces cable fatigue
- Dual direct-drive hydraulic cylinders
- Extended height top-beam provides greater overhead clearance
Pure Brutish Muscle 2 Post Hoist
Lifting up to 8.1t, this hoist is a durable, safe and reliable system for virtually every lifting application you can throw at it. The secure and heavy duty XPR-18C is an incredibly rapid lift with a wide range of features that increase your efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. Get lower operating expenses and higher productivity using this perfect addition to your workshop, especially when you work with heavier vehicles that require larger lifting capacities.
While built heavy duty for commercial this solid 2 post hoist can still be gentle enough for your light-duty work as well. The two-post XPR-18C easily has the capacity to lift your largest full-sized pickups and commercial vehicles, yet still provide specific capability for sport and compact cars, both foreign and domestic.
XPR 15 Series Models
XPR 18C XH
(Columns have Extra Height)
BendPak hoists meet the Australian (AS 1418.9) and International Standards.
Car Lift Arm Design
Lowered Arm Tube Supports
To minimise the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.
Car Lift Column Construction
Single Piece Column (Left)
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Optional Column Extension (Right)
Gives you the flexibility of increasing the overhead clearance to maximise the vehicles you can service.
Safety with Smart Technology
Single Point Safety Release (Left)
The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.
On the level
Our dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.
Auto Shut-off Top Bar (Above)
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.
Durable Powder-Coat Finish
High Speed Hydraulics
All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.
Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.
BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.
Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurised hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.
XPR Series 2 Post Hoist Warranty
Don’t Leave Your Servicing and Certification to Chance
For more than a decade, America’s best lift has been coupled with the best warranty in the business. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer.
Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!
|Hoist Description||XPR-18c||XPR-18c XH|
|Lifting capacity*||18,000 lbs. / 8,165 kg||18,000 lbs. / 8,165 kg|
|*Max capacity / front axle: 9,000 lbs. / 4,082 kg||*Max capacity / front axle: 9,000 lbs. / 4,082 kg|
|*Max capacity / rear axle: 9,000 lbs. / 4,082 kg||*Max capacity / rear axle: 9,000 lbs. / 4,082 kg|
|Overall height:||170″ / 4,318 mm||192″ / 4,877 mm|
|Overall width (outside of base plate)||155″ / 3,937 mm||155″ / 3,937 mm|
|Width (outside of columns)||144″ / 3,658 mm||144″ / 3,658 mm|
|Floor to overhead switch||165″ / 4,191 mm||187.7″ / 4,768 mm|
|Inside columns||120″ / 3,048 mm||120″ / 3,048 mm|
|Front arm min reach||39″ / 991 mm||39″ / 991 mm|
|Front arm max reach||60″ / 1,524 mm||60″ / 1,524 mm|
|Rear arm min reach||39″ / 991 mm||39″ / 991 mm|
|Rear arm max reach||60″ / 1,524 mm||60″ / 1,524 mm|
|Min pad height||5″ / 127 mm||5″ / 127 mm|
|Rise||69″ / 1,753 mm||69″ / 1,753 mm|
|Lift height max (pad only)||74″ / 1,880 mm||74″ / 1,880 mm|
|Lift height max (6″ adapter)||80″ / 2,032 mm||80″ / 2,032 mm|
|Drive-thru clearance||106″ / 2,692 mm||106″ / 2,692 mm|
|Motor||3Ph / 415v / 50Hz / 16 amps||3Ph / 415v / 50Hz / 16 amps|
|Time to full rise||45 sec||45 sec|
|Max load per arm||4,500 lbs. / 2,041 kg||4,500 lbs. / 2,041 kg|
|Shipping weight||3,333 lbs. / 1,515 kg||3,333 lbs. / 1,515 kg|
|Shipping dimensions||172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm||172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm|