XPR-15 Series

Description

Super-Duty Clear Floor 2 Post Hoist

Featuring a huge 6.8t lift capacity, heavier column construction, carriage construction and frame components, this heavy duty hoist is ready for your busy commercial workshop. With clear floor ease of use, the lift offers superior direct drive performance, backed by cutting edge technology and high quality materials. Ideally suited to shops with a ceiling height of 12 feet minimum, this lift won’t crowd your floor while you work beneath it.

  • 6,804 kg Lifting capacity
  • CE Approved and Certified. Meets Australian Standards AS 1418.9
  • Extended height top-beam provides greater overhead clearance
  • Safety locks in each column spaced every 3″

Proven Power and Reliability 2 Post Hoist

Lifting up to 6.8t, this hoist is a durable, safe and reliable system for virtually every lifting application you can throw at it. The secure and heavy duty XPR-15 Series is an incredibly rapid lift with a wide range of features that increase your efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. Get lower operating expenses and higher productivity using this perfect addition to your workshop, especially when you work with heavier vehicles that require larger lifting capacities. While built heavy duty for commercial this solid 2 post hoist can still be gentle enough for your light-duty work as well. The two-post XPR-15 Series easily has the capacity to lift your largest full-sized pickups and commercial vehicles, yet still provide specific capability for sport and compact cars, both foreign and domestic.

XPR 15 Series Models

XPR 15C

XPR 15C XH (Columns have Extra Height)

BendPak hoists meet the Australian (AS 1418.9) and International Standards.

Car Lift Arm Design

Lowered Arm Tube Supports To minimise the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Car Lift Column Construction

Single Piece Column (Left) We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.


Optional Column Extension (Right) Gives you the flexibility of increasing the overhead clearance to maximise the vehicles you can service. XPR-10 XH 2 Post Hoist Overview »

Safety with Smart Technology

Single Point Safety Release (Left) The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use. On the level Our dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition. Auto Shut-off Top Bar (Above) A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.

Durable Powder-Coat Finish

High Speed Hydraulics

All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.
Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

Direct-Drive Technology

BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurised hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.

XPR Series 2 Post Hoist Warranty

Don’t Leave Your Servicing and Certification to Chance

For more than a decade, America’s best lift has been coupled with the best warranty in the business. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer.
Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime! Need More Information? Click Here »
Hoist Description XPR-15c XPR-15c XH
Lifting capacity* 15,000 lbs. / 6,804 kg 15,000 lbs. / 6,804 kg
*Max capacity / front axle: 7,500 lbs. / 3,402 kg *Max capacity / front axle: 7,500 lbs. / 3,402 kg
*Max capacity / rear axle: 7,500 lbs. / 3,402 kg *Max capacity / rear axle: 7,500 lbs. / 3,402 kg
Overall height: 170″ / 4,318 mm 192.7″ / 4,895 mm
Overall width (outside of base plate) 155″ / 3,937 mm 155″ / 3,937 mm
Width (outside of columns) 144″ / 3,658 mm 144″ / 3,658 mm
Floor to overhead switch 165” / 4,191 mm 187.7″ / 4,768 mm
Inside columns 120″ / 3,048 mm 120″ / 3,048 mm
Front arm min reach 39″ / 991 mm 39″ / 991 mm
Front arm max reach 60″ / 1,524 mm 60″ / 1,524 mm
Rear arm min reach 39″ / 991 mm 39″ / 991 mm
Rear arm max reach 60″ / 1,524 mm 60″ / 1,524 mm
Min pad height 5″ / 127 mm 5″ / 127 mm
Rise 69″ / 1,753 mm 69″ / 1,753 mm
Lift height max (pad only) 74″ / 1,880 mm 74″ / 1,880 mm
Lift height max (6″ adapter) 80″ / 2,032 mm 80″ / 2,032 mm
Drive-thru clearance 106″ / 2,692 mm 106″ / 2,692 mm
Motor 3Ph / 415v / 50Hz / 16 amps 3Ph / 415v / 50Hz / 16 amps
Time to full rise 45 Seconds 45 Seconds
Max load per arm 3,750 lbs. / 1,701 kg 3,750 lbs. / 1,701 kg
Shipping weight 2,986 lbs. / 1,357 kg 2,986 lbs. / 1,357 kg
Shipping dimensions 172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm 172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm