Superior Direct-Drive Performance
2 Post Hoist
This lift offers superior direct drive performance, cutting edge technology, top quality materials and design excellence. Ideally suited to workshops with a minimum ceiling height of 14 feet, and for those who prefer clean space while working beneath a vehicle.
Every XPR-12 Series comes with:
- Lifting capacity up to 5,400 kgs
- Direct-Drive two post car lift technology
- Triple-telescoping arm set
- Maintenance-free load bearings
- Dual-synchro equalisation system
- Industrial-grade hydraulic cylinders
Beefier Lifting Capacity 2 Post Hoist
The powerful and secure super-duty XPR-12 Series is an incredibly rapid lift with a broad range of features to increase efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. The results are lower operating expenses and higher productivity. If you’re looking to make more money in less time than ever before, you’ll find that the new XPR-12 Series lift is the perfect addition to your shop – especially when you work with heavier vehicles that require larger lifting capacities. While designed with heavy duty commercial vehicles in mind, this unit can still provide specific capability for general automotive, both foreign and domestic. The XPR-12 Series is a 5.4t maximum capacity, close top model lift with full-reach arms that collapse to standard lengths and lower lift pads that clutch standard passenger automobiles, yet still hold heavier vehicles as well. BendPak hoists meet the Australian (AS 1418.9) and International Standards.
XPR 12 Series Models
(Columns have Extra Height)
(Shorter Columns with Floor Plate)
Car Lift Arm Design
Lowered Arm Tube Supports
To minimise the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.
Automatic Arm Restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.
Car Lift Column Construction
Single Piece Column (Left)
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Optional Column Extension (Right)
Gives you the flexibility of increasing the overhead clearance to maximise the vehicles you can service.
Safety with Smart Technology
Single Point Safety Release (Left)
The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.
On the level
Our dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.
Auto Shut-off Top Bar (Above)
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.
Durable Powder-Coat Finish
High Speed Hydraulics
All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.
Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.
BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.
Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurised hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.
XPR Series 2 Post Hoist Warranty
Don’t Leave Your Servicing and Certification to Chance
For more than a decade, America’s best lift has been coupled with the best warranty in the business. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer.
Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!
|Hoist Description||XPR-12c||XPR-12c XH||XPR-12FD|
|Lifting capacity*||12,000 lbs. / 5,443 kg||12,000 Lbs. / 5,443 Kg||12,000 Lbs. / 5,443 Kg|
|*Max capacity / front axle:||6,000 lbs. / 2,722 kg||6,000 lbs. / 2,722 kg||6,000 lbs. / 2,722 kg|
|*Max capacity / rear axle:||6,000 lbs. / 2,722 kg||6,000 lbs. / 2,722 kg||6,000 lbs. / 2,722 kg|
|Overall height||170″ / 4,318 mm||192.7″ / 4,895 mm||144″ / 3,403 mm|
|Overall width (outside of base plate)||155″ / 3,937 mm||155″ / 3,937 mm||155″ / 3,937 mm|
|Width (outside of columns)||144″ / 3,658 mm||144″ / 3,658 mm||146″ / 3,708 mm|
|Floor to overhead switch||165” / 4,191 mm||187.7″ / 4,768 mm||—-|
|Inside columns||120″ / 3,048 mm||120″ / 3,048 mm||118″ / 2,997 mm|
|Front arm min reach||32″ / 813 mm||32″ / 813 mm||39″ / 991 mm|
|Front arm max reach||60″ / 1,524 mm||60″ / 1,524 mm||59″ / 1,499 mm|
|Rear arm min reach||32″ / 813 mm||32″ / 813 mm||39″ / 991 mm|
|Rear arm max reach||60″ / 1,524 mm||60″ / 1,524 mm||59″ / 1,499 mm|
|Min. Pad height||5″ / 127 mm||5″ / 127 mm||5″ / 127 mm|
|Rise||69″ / 1,753 mm||69″ / 1753 mm||69″ / 1,753 mm|
|Lift height max (pad only)||74″ / 1,880 mm||74″ / 1880 mm||74″ / 1,880 mm|
|Lift height max (6″ adapter)||80″ / 2,032 mm||80″ / 2032 mm||80″ / 2,032 mm|
|Drive-thru clearance||106″ / 2,592 mm||106″ / 2692 mm||103″ / 2,616 mm|
|Motor||3Ph / 415v / 50Hz / 16 amps||3Ph / 415v / 50Hz / 16 amps||3Ph / 415v / 50Hz / 16 amps|
|Time to full rise||45 Seconds||45 Seconds||55 Seconds|
|Max load per arm||3,000 lbs. / 1,361 kg||3,000 Lbs. / 1,361 kg||3,000Lbs. / 1361 Kg|
|Shipping weight||2,588 lbs. / 1,176 kg||2,588 lbs. / 1,176 kg||2,458 lbs. / 1,117 kg|
|Shipping dimensions||172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm||172″ x 29″ x 54″ / 4,369 mm x 737 mm x 1,372 mm||151″ x 29″ x 54″ / 3,835 mm x 737 mm x 1,372 mm|