XPR-10S two post hoist

Expandable width symmetric car lift

Able to comfortably lift up to 4.5t, the XPR-10S 2 post car lift offers exceptional direct-drive lifting performance with loads of benefits. Its industrial strength, cutting edge technology, and top of line design and materials make it versatile and tough enough for any workshop. Suited for workshops with a minimum ceiling height of 12 feet, this two post hoist allows you to maintain a clean floor while you work beneath vehicles.

  • Lifting capacity 4,536 kgs
  • Expandable top beam accommodates wide or narrow drive-through configuration
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single-point safety release
  • 4 piece 63 mm stackable adapter set comes standard

Clear Floor Versatility – Rugged Dependability

Safe and rugged, the XPR-10S two post lift features an adjustable top beam to accommodate wide or narrow installations. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR Series design requires very little service or maintenance for an overall lower cost of ownership.
Featuring the most advanced engineered technology available in the industry, these lifts are built to safety standards well above normal requirements. Combined with traditional durability and reliable construction, this lift offers an abundance of options and accessories allowing you to fully tailor your lift to your unique circumstance. The XPR Series lifts include a wealth of standard and optional features to support the operator’s need for performance and security.

BendPak hoists meet the Australian (AS 1418.9) and International Standards.

Car Lift Column Construction

Single Piece Column (Left)
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.


Optional Column Extension (Right)
Gives you the flexibility of increasing the overhead clearance to maximise the vehicles you can service.

XPR-10 XH 2 Post Hoist Overview »

Car Lift Arm Design

Lowered Arm Tube Supports
To minimise the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.

Automatic Arm Restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Advanced Engineering in Construction

Taller Lift Carriages
Take a close look at our lift carriages (the lifting assembly that the arms are attached to) and then take a look at the competition. You’ll notice our 53″ tall carriages are considerably taller than most, which minimises the stress placed on the load bearings and columns.

Dual-hub Cable Sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

Maintenance-free Load Bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.

Safety with Smart Technology

Single Point Safety Release (Left)
The single point safety release and “dead man” style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.

On the level
Our dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Auto Shut-off Top Bar (Above)
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.

Durable Powder-Coat Finish

High Speed Hydraulics

All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.

Free-flow, high-pressure 3/8″ hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.

BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.

Direct-Drive technology is preferred on commercial-grade two post car lifts as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurised hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and fills the inside cavity. The pressure of the hydraulic fluid extends the piston rod downward raising the cylinder body and lift carriages. A dual-synchro equalisation system maintains equal lifting and provides operators with a stable, level vehicle working condition.

XPR Series 2 Post Hoist Warranty

Don’t Leave Your Servicing and Certification to Chance

For more than a decade, America’s best lift has been coupled with the best warranty in the business. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer.

Hoists and other equipment in your workshop need annual servicing and certification by law for you to continue working safely and productively in your business. With our 34-point checklist and manufacturer trained servicing agents, you can be assured that your workshop equipment will work when you need it do, with the minimum downtime!

Need More Information?
Click Here »

Lifting capacity* 10,000 lbs. / 4,536 kg
*Max capacity / front axle: 5,000 lbs. / 2,268 kg
*Max capacity / rear axle: 5,000 lbs. / 2,268 kg
Overall height 145″ / 3,683 mm
Overall width (NARROW CONFIG) 132″ / 3,353 mm
Overall width (WIDE CONFIG) 145″ / 3,683 mm
Width outside of columns (NARROW) 127″ / 3,226 mm
Width outside of columns (WIDE) 140″ / 3,556 mm
Floor to overhead switch* 141″ / 3,581 mm
Inside columns (NARROW) 105″ / 3,208 mm
Inside columns (WIDE) 118″ / 3,538 mm
Front arm min reach 25 – 1/2″ / 648 mm
Front arm max reach 51 – 1/2″ / 1,308 mm
Rear arm min reach 34″ / 863 mm
Rear arm max reach 54 – 1/2″ / 1,384 mm
Min pad height 4″ / 102 mm
Rise 69″ / 1,753 mm
Lift height max (pad only) 73″ / 1,854 mm
Lift height max (6″ adapter) 79″ / 2,007 mm
Motor 3Ph / 415v / 50Hz / 16 amps
Time to full rise 45 sec
Max load per arm 2,500 lbs. / 1,134 kg