M624 2V FS

Super Automatic Tyre Changer

Suited for all car wheels, this tyre changer enables the operator to mount and demount any type of tyre currently available on the international markets, from standard and sport, through to low profile tyres.

  • Suitable for all car tyres
  • Lever-less technology
  • Air-operated tilting column

Automatic tyre changer with tilting post, suitable for all car, SUV, van and motorcycle wheels. Available in one-speed motor version and in 2V version with two-speed motor and tubeless inflating device FS.

Tool-holder shaft is balanced and activated by means of an air-operated servocontrol with automatic head locking in the ideal working position. A roller under the horizontal operating arm minimises the effort of operators.

Turntable equipped with a patented system to switch the working range from 10” – 20” to 14” – 24” (from outside rim clamping) with a simple manual shift.

M624 tyre changers equipped with ALLY 80 bead lifting/pressing device, are tested and approved by WDK Frankfurt to mounting and dismounting the UHP and Run Flat Tyres system.

“IP system” (Increased Power system): speed rotation of the turntable automatically adjustable, the torque remains at the best ratio also at maximum speed. Available only for M624 2V FS (2-speed version: 6 – 15 rpm). The turntable can clamp alloy rims of new-generation from both outside and inside without any damage thanks to its special plastic protections supplied as standard.

The bead-breaking arm can be set in two positions: standard and racing. In the racing position the blade opening is 430 mm! The blade is articulated for better penetration between tyre bead and rim. A special plastic guards (supplied as standard), to protect alloy rims during the bead-breaking.

The tubeless inflating device pedal, located at the side of the unit to prevent accidental activation. The high capacity tank (16 litres) located inside the unit complies with Norm EN 286 I.1 in conformity with EEC (European Economic Community) guidelines 87/404/EEC.

Supplied accessories:

  • Tyre lever
  • Set of 4 jaw pads
  • Plastic cover for blade
  • Plastic cover for tyre lever
  • 2 pc. Plastic inserts for tool head

Recommended accessories / also available:

  • Ally 30 help arm
 

Ally 70

Help arm and bead pressing device

  • 2 Speed
  • Tubeless Inflation

 

Self Centering Chuck Opening 10″ ÷ 24″ Ext.
Self Centering Chuck Opening 13″ ÷ 26″ Int.
Bead Breaking Power (blade) 10 BAR 15.500 Nm
Bead Breaking Blade Opening 430 mm
Max. Wheel Diameter 1060 mm
Max. Wheel Width 3 ÷ 14″
Working Pressure 10 BAR
Noise Level When Running/td> > 70 dB (A)
Two Speed Motor 0,75 kW-1 Ph-200/230 V-50/60 Hz
Max Self Centering Torque 1.200 Nm
Weight Machine 265 kg

Other Information