In Ground Truck & Bus Lift
The Next Big Leap,
In-Ground Heavy Vehicle Lifts
AC Hydraulic has departed from the traditional understanding of inground lifts and created the lift of the future.
The lift is delivered ready for use in steel cassettes with 2, 3, 4 or 5 lifting rams. The lift has a capacity from 30–75 tonnes.
A level workshop floor and optimum mobility offers the best possible working conditions and improved efficiency, safety and profitability.
Supplied standard with telescopic lifting rams to increase lifting heights and at the same time reducing construction depth.
The result is a simple installation at lower costs.
In-Ground Heavy Vehicle Lifts – AC Hydraulic has departed from the traditional
understanding of inground lifts and created the lift of the future.
Plug & Play
After digging and concreting the foundation it is only a question of connecting the steering box cable.
The low construction depth reduces costs considerably compared to traditional inground lifts.
The watertight self-supporting steel cassette ensures a stable shuttering when refilling
The cable is connected to the steering box and hereafter the lift is fully operational.
Touch Screen Control
User friendly remote control offers information about the operation of the lift, ram positions as well as on safety and maintenance.
Lifting, lowering and positioning is easily controlled by the remote control.
The lifting rams can be used either one by one or synchronized.
Safety & Stability
Square lifting rams ensure maximum stability.
2 independent hydraulic circuits in each lifting ram offer optimum safety: One circuit will hold the entire load if necessary.
The hydraulic circuits are fully protected inside the lifting rams.
In case of power failure lowering is still possible by connecting a 24V battery.
CE-marked: comply with European Standard EN 1493
Always The Optimum
Lifting height can be adjusted to suit any possible lifting job.
The cross beams can be stored at floor level in full pit length.
The lift is particularly suitable for workshops servicing many different vehicle types.
Robust Rolling Cover with 7t Capacity
Robust rolling cover made in non-slip aluminium profiles provides a nice and level workshop floor.
Cross beams and rolling cover are always level with the workshop floor in the full pit length no matter the position of the cross beams.
The cassette is designed with pump sump to absorb oil and water.
|2 Lifting Rams – UL2||3 Lifting Rams – UL3||4 Lifting Rams – UL4||5 Lifting Rams – UL5|
|Lifting Capacity||30 Tonne||45 Tonne||60 Tonne||75 Tonne|
|Stroke||1,900 mm||1,900 mm||1,900 mm||1,900 mm|
|Rams / Moveable||2 / 1||3 / 2||4 / 3||5 / 4|
|Cassette Length||8,700 mm||14,340 mm||17,400 mm||20,000 mm|
|Cassette Width||1,030 mm||1,030 mm||1,030 mm||1,030 mm|
|Lifting Points Distance||2,500 – 7,500 mm||1,300 – 12,800 mm||1,300 – 16,500 mm||1,300 – 19,025 mm|
|Speed Up/Down||80 Seconds||80 Seconds||80 Seconds||80 Seconds|
|Power Requirements||12 kw||18 kw||24 kw||30 kw|
|Liter Oil / Ram||25 l||25 l||25 l||25 l|
|Weight||4.6 Tonne||7 Tonne||9 Tonne||11 Tonne|